Moderator: JR Moderator
- Posts: 3692
- Joined: Sunday, 03 October 2010, 20:23 PM
- Radio: Kenwood, Yaesu, Icom
- Antenna: Yes
- Name: Sly
- Location: Sherman TX
- Referrals: 1
Zero Six Three
Official Moderator - CBRT Complaints Department
We encourage all users to support our sponsors. We believe our sponsors are the best out there.
Be sure to tell them you saw their name on CBRadioTalk.
Support our fine sponsors!
- Posts: 7354
- Joined: Saturday, 12 June 2010, 19:05 PM
- Logged in via: iPad
- Radio: Uniden Washington
- Antenna: Avanti Sigma II
- Name: Greg
- Location: Baltimore, MD
Welcome to the forum. Your little radio at the most is about 2.5 amps when transmitting but that old Palomar amplifier has some old style transistors in it so I would guess a good 15 amps for it. Like Sly said you could get by with what you have now and save up for a good 20 amp or larger power supply. I hope you aren't charging the battery inside your house, the gases when charging are explosive and smell awful.
"321, the Middle of Maryland"
23 AM "WORLD WIDE" 38 LSB
Strong Supporter of America's Original Homeland Security Act
The Second Amendment
Texas Ranger TR-696FD1C
Avanti Sigma II
Homemade Full Wave Loop
Homemade 1/2 wave Dipole
Hustler 102" SS Whip and Hustler Ball Mount
- Posts: 1264
- Joined: Saturday, 19 March 2011, 18:50 PM
- Radio: Many
- Antenna: Super Penetrator 500
- Name: Mark
- Home Phone: Unit 613 Boston
- Cell Phone: CBRT 18204
- Location: Massachusetts, USA
- Referrals: 2
"LISTEN FOR THE PING"
Kenwood TS-590S - Yaesu FT897D - W2IHY 8 Band EQ - W2IHY EQPlus
Yaesu FT-101E - Tram D201A - President Lincoln - CP2000
Gizmotchy G-31 Beam
Super Penetrator 500 5/8 Wave
Comet GP9 2 meter/440
"North East Corner Of Massachusetts 613"
(Click image to enlarge)
- Posts: 186
- Joined: Friday, 01 February 2013, 4:41 AM
- Radio: RCI 2990, 98VHP
- Antenna: Sirio Tornado
- Name: Rob
Any type of standard battery charger you attempt to use will introduce noise in the system, they aren't filtered for that application.
Look into a good quality power supply, I wouldn't advise a "switching" type, they can be used but they have there draw backs also. Also remember that advertised current ratings are "surge" and not continuous duty... in other words buy one thats about double of what you need.
Good luck and enjoy.
Just using it for the radio would probably be okay, but any long keying with that amplifier is going to drain it quickly.
http://en.wikipedia.org/wiki/VRLA_battery" onclick="window.open(this.href);return false;
- Wordwide & Qualified
- Posts: 1617
- Joined: Sunday, 18 July 2010, 17:54 PM
- Radio: (non-sponsor) 29 LTD
- Antenna: *Censored*
- Wordwide & Qualified
- Posts: 5819
- Joined: Saturday, 06 December 2008, 5:44 AM
- Location: Oklahoma
- Referrals: 1
How long will your 55 aH battery last? Divide the amount of average current use by the radio into that 55 aH. The result will be in hours. That assumes that the thing is fully charged, which they al;most never are, so it's a 'ball-park' time number. Typically, figure maybe half of that? If using the amplifier too, then add the currents for the radio and amplifier and divide it into that 55 aHs. That's close to what you can expect. If you use the fuse values for that time figuring it gives you a closer estimate than if you measure the currents drawn by either/both devices. Quit before you use up all of that 'time' or the battery ends up dead to the world.
- Posts: 73
- Joined: Saturday, 03 July 2010, 19:47 PM
- Radio: Ranger / RCI 2970N2
- Antenna: IMax
- Name: Pistol_Pete
- Location: Northeast, Indiana
Ranger/RCI 2995 DX / Turner RK 56 / MAX 2000
Ranger / RCI 6900F25 / Turner RK 56 / Wilson 1000
Ranger/RCI 69FFC2 / Astatic 636L-c / Wilson 1000
- Posts: 186
- Joined: Friday, 05 July 2013, 18:39 PM
- Radio: Cobra 142
- Antenna: Starduster
- Name: Mike
- Location: SE Louisiana, North of New Orleans
You can "theoretically" get 55 "amp hours" out of a 55 amp hour battery. Eg: @ 1 amp for 55 hours, 55 amps for 1 hour etc. but that is only the amount of current it can produce.
The practical problem is what will the output voltage be at variable current draws. At a 5 amp draw a 12 volt 55 amp hour battery may provide 12-11.5 volts, at 10 amps it may only provide 10-9 volts. No easy answer and different battery types have different voltage to current curves.
Have to put a current and volt meter on the battery output (fully charged) and put the load on it and see what the voltage drop is to determine if it will be useful.
For surveillance purposes we figured to get the rated 12 volts volts for the longest time if only drawing 10% of the amp hour rating. Stuff would still work at the lower voltages past that, but it was time to finish the operation if reliability was critical.
A 55 amp hour battery should be fine with a CB & 100 watt amp for brief intermittent transmissions. I find those $12.00 trickle chargers work fine to keep a battery charged up when unattended.
- 6 PILL USER
- Posts: 51
- Joined: Wednesday, 16 October 2013, 7:38 AM
- Radio: Philly148GTL
- Antenna: Wilson Silverload
- Name: Cody
- Location: Williston ND
- 2 PILL USER
- Posts: 14
- Joined: Sunday, 29 March 2015, 11:51 AM
- Radio: Robyn T-240
- Antenna: IMAXX 2000
- Name: William White
- 443 Arizona
- Wordwide & Qualified
- Posts: 667
- Joined: Thursday, 29 April 2010, 13:22 PM
- Radio: madison on 5/8 wave
- Location: phoenix, arizona
when i wanted "full power", (which i can only guess what that equated to),
i would turn it on , haha, really put the ping in it.
yes it put a hum in the humdinger...
that radio was built like a tank. so i would say it depends on your radio.
as for fumes, well the kerosene lamp didnt do me in and i was conscience of the fact i was producing an explosive gas.
dont worry, it would have only been a small explosion
- Scipio Kid
- Posts: 211
- Joined: Monday, 18 July 2016, 7:31 AM
- Radio: Cobra 29 LX Tweaked
- Antenna: Crummy
- Name: Scipio
- Location: Out West in Herriman
Small explosions are relative. If you're real close, they don't seem so small. This thread is really something. Lots of good information and I'm hoping someone can give me a little more.
Got a friend who just set up a nice mobile home at a yard where he can keep an eye on things 24/7. I offered to get a base station set up for him and was shocked to find he was running everything off the batteries in a Freightliner tractor and firing it up a few times a day to charge the batteries. I got a permanent 240/120V A/C service run to him but found the trailer was a little screwed up when he got it. All the heavy draw stuff runs off the A/C but the low draw stuff (lights, fridge, small fans etc.) is all on 12VDC (typical for RV's). He called me to say his lights and fridge and etc. all went out and the batteries died a day after I got the A/C hooked up but he could hear the fan in the rectifier (big 12V power supply) running so he was sure it was working. When I showed up, he had a big battery charger and 4 batteries sitting on the floor and had jumpers into the 12V circuits. I determined the power supply wasn't working at all but the fan would come on when he hooked the batteries into the system.
Long story short, the big 12V power supply isn't working. Although I dont' have technical info on it (other than it's a 120V A/C to 12V DC 50 amp output unit), I'm wondering if it's worth repairing. I know the small ones are basically throw away. This one is big and fits perfectly in between a transfer switch and fuse box with pre-cut wires coming in and out all bunched up under come cabinets so retrofitting anything different would be difficult but not impossible. So I"m wondering if anyone has experience repairing these bigger power supplies.
Any recommendations or advice would be very helpful. Maybe I'll just sell him my Radio Shack base and plug it into the wall ... he'll just have to use ice and a flashlight for the other stuff.
Who is online
Users browsing this forum: No registered users and 2 guests