Interference problem

This is the place to post your general tips or ask questions about your installation, whether it's for mobile or base stations.
Post Reply
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Interference problem

Post by funfly53 »

I'm getting some kind of interference on my CB that sounds like someone keying up a mic. It lasts about 2 seconds and happens about every 3 seconds 24/7. I've unplugged everything in my building so I'm pretty sure it's not coming from inside. There are a couple towers 3 or 4 miles from my house (not sure what kind). Could they be causing the problem or could it be my old antenna?
Thanks
User avatar
Foliant
Duckplucker
Duckplucker
Posts: 130
Joined: November 3rd, 2013, 10:47 am
Real Name: Patrick
Antenna: K40 SF300
Contact:

Re: Interference problem

Post by Foliant »

funfly53 wrote:24/7
Maybe Smart-Metering?
de 13PR87
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

Don't want to sound dumb but what is "Smart Metering" ?
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,740
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Interference problem

Post by MDYoungblood »

funfly53 wrote:Don't want to sound dumb but what is "Smart Metering" ?
"Smart Meter" is the new meters the electric companies are using to keep track of our usage, yes they transmit a signal and yes they are noisy. The noise may not even be coming from your house could be a neighbor, traffic and street lights, and possibly the towers you said earlier but I don't think that 3 miles away would be possible. I have track down several problems in my area by just riding around on the channel that is having the interference. If you unplug the antenna and still have the noise it is electrical, coming through the wiring or being picked up by it.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

I did unplug the antenna and it stopped. Would there be some kind of filter to help in a situation like this?

'
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

Oh by the way, it's on all channels including uppers and lower and my scanner.
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,740
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Interference problem

Post by MDYoungblood »

That shows it is being transmitted, got to be something close. The time intervals makes me think it is a traffic signal or a warning light, do you happen to have one close by?

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

No Greg, actually I'm a long ways from any kind of traffic signal. After paying closer attention the intervals are faster and constant about a long second between. On the scanner I can cut the squelch down and not hear it until it picks up a signal and then it's louder than the talk. It's kind of discouraging since I took a while deciding if I was going to get back into this again.
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,740
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Interference problem

Post by MDYoungblood »

I understand this noise is on your base, is it noticeable in the mobile too? Does is sound mechanical or an arching static? At what point does a modulated signal override it? Now you got me really curious.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

I don't have a mobile. It's more of a mechanical static. And, the modulated signal doesn't override it. It overrides everything.
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,740
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Interference problem

Post by MDYoungblood »

Just out curiosity, if you have a long (50 or 100ft) extension cord, try plugging it in at different receptacles in the house, if you have a generator, hook up to it and kill all the power to the house. If you have the 12v power cord, hook to a battery or power supply, (power supplies are filtered). Do you have the antenna grounded well, static discharges can build up on a fiberglass antenna, I'm guessing that is what you have, not so much on metal antennas. Also a static discharge/lightning arrestor inline with the coax, grounded as well. The only other thing it is something in the radio causing it.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

Yes it is a fiberglass antenna. I'm not clear on the grounding. What would be the best way to ground it?
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,740
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Interference problem

Post by MDYoungblood »

funfly53 wrote:Yes it is a fiberglass antenna. I'm not clear on the grounding. What would be the best way to ground it?
A couple of ground rods from Home Depot and some heavy copper wire from the antennas support structure (bottom of the mast) to the rods. You can look up antenna grounding on the forum, lots of info. Lightning arrestor info too.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
funfly53
2 PILL USER
2 PILL USER
Posts: 14
Joined: July 7th, 2014, 7:10 am
Real Name: Glenn Mayton
Antenna: m400 starduster
Radio: Galaxy DX 2547
Contact:

Re: Interference problem

Post by funfly53 »

Ok, I'll give it a try.
Post Reply