Golden Eagle

A place to ask questions about base setup for CB radios or HAM radios. Talk about your experiences, seek advice, and share knowledge.
Post Reply
User avatar
Wingshooter
Mud-Duck Jr.
Mud-Duck Jr.
Posts: 4
Joined: November 26th, 2016, 9:46 pm

Golden Eagle

#381555

Post by Wingshooter »

Can someone describe how to use the SPOT feature.
User avatar
pabxone

#381557

Post by pabxone »

The owners manual is here :- [Please login or register to view this link]

The instructions are on Page 10
User avatar
Wingshooter
Mud-Duck Jr.
Mud-Duck Jr.
Posts: 4
Joined: November 26th, 2016, 9:46 pm

#381581

Post by Wingshooter »

I've read the manuals. Watched youtube. I was hoping someone could just say. " push the button and turn __________ dial until ___________
User avatar
bluemeanie
Donor
Donor
Posts: 349
Joined: November 1st, 2012, 9:11 pm

#381582

Post by bluemeanie »

select the channel you want to use on transmitter. Push the spot tune the receiver for highest needle reading on receiver
User avatar
Wingshooter
Mud-Duck Jr.
Mud-Duck Jr.
Posts: 4
Joined: November 26th, 2016, 9:46 pm

#381585

Post by Wingshooter »

Thank you!. I really appreciate that.
User avatar
Triple-3
Mud-Duck Jr.
Mud-Duck Jr.
Posts: 4
Joined: March 13th, 2015, 4:22 pm

#402749

Post by Triple-3 »

bluemeanie wrote: November 27th, 2016, 4:09 pm select the channel you want to use on transmitter. Push the spot tune the receiver for highest needle reading on receiver
That is correct.....
User avatar
Double J
Donor
Donor
Posts: 110
Joined: April 4th, 2009, 9:18 pm

#407219

Post by Double J »

It links the receiver to the transmitter. If you have the banana Mike it should squel after you spot.
P = E x I
Post Reply