Hello. I have a Realistic Amplified Base Station mic. It was working but quit. I opened the bottom & accidentally separated the wires from the switch to the circuit board. Can anyone provide me with a clear picture of the switch wiring to the circuit board. Once I get it all re-soldered correctly then I'll try and firgure out why it stopped working.
Tks in adv.
Critter98
Realistic 21-1173 wiring
-
Windwalker
Verified - Moderator
- Posts: 399
- Joined: February 19th, 2011, 9:03 pm
Hi Critter that wiring is easy to find online. You just have to google it.
I cant post you a link due to the websites not being sponsors here.
Those are the rules.
I am gonna send you a PM
WW Global
I cant post you a link due to the websites not being sponsors here.
Those are the rules.
I am gonna send you a PM
WW Global
-
Critter98
- 2 PILL USER
- Posts: 10
- Joined: February 15th, 2024, 5:14 am
OK. I've managed to get this mic working again. Replaced the buggered switch & re-wired it. Next time I'll draw a picture or label the wires and/or position of them. Thanks to all.
-
MDYoungblood
Verified - Site Admin
- Posts: 10,740
- Joined: June 12th, 2010, 8:05 pm
Sorry I couldn't help but with all the wires off the only 2 really dedicated are the shield and audio which is bare and white, the other 4 are switching circuit.
3's
Greg
3's
Greg
