My mic is currently wired to an old President P-200 radio. It is wired to a 5 pin connector (like a realistic). I want to re-wire it to a 4 pin for a Uniden PC-68LTD 50th Anniversary Radio. I'm looking for info on which wires go where.
Tks in adv.
Critter98
Diesel 4-6 amplified mic
-
MDYoungblood Verified
- Site Admin
- Posts: 10,740
- Joined: June 12th, 2010, 8:05 pm
You will need to first take the microphone plug (realistic 5pin din) apart without removing the wires from the plug itself, note the color and location of each wire, get a plug suitable for the President/Uniden radio and use this chart to rewire.
If you have a problem ,give me a shout.
3's
Greg
If you have a problem ,give me a shout.
3's
Greg
You do not have the required permissions to view the files attached to this post.
- Critter98
- 2 PILL USER
- Posts: 10
- Joined: February 15th, 2024, 5:14 am
Thanks Greg. Much appreciated.